Leave Your Message

XINXIA-VentPlug_D38_E20WO

    Product Technical Data Sheet

    PRODUCT NAME Snap-In Vent Plug
    PRODUCT MODEL XINXIA-VentPlug_D38_E20WO
    PRODUCT DIAGRAM 52
    MEMBRANE MODEL XINXIA-E20WO
    APPLICATION FIELD Chemicals Packaging
    APPLICATION CHEMICAL Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer

    Product Properties

    PHYSICAL PROPERTIES

    TEST METHOD

    UNIT

    TYPICAL DATA

    Plug Material 

     

    /

     

    /

    HDPE

    Plug Color 

    /

    /

    White

    Membrane Construction 

    /

    /

    PTFE/PO non-woven

    Membrane Surface Property 

    /

    /

    Oleophobic &  Hydrophobic

    Typical Air  Flow Rate 

     

    ASTM D737

    ml/min @ 7KPa

    4500

    Water Entry Pressure 

     

    ASTM D751

     

    KPa dwell 30 sec

     

    ≥90

    IP Grade

     

    IEC 60529

     

    /

    IP67/IP68

    Moisture Vapor Transmission 

     

    ASTM E96

     

    g/m2/24h

     

    >5000

    Oleophobic Grade 

     

    AATCC 118

     

    Grade

    ≥7

    Service Temperature

     

    IEC 60068-2-14

    -40℃ ~ 125℃

    ROHS

     

    IEC 62321

    /

    Meet ROHS Requirements

    P F OA  &   PF OS

    US EPA 3550C & US EPA

    8321B

     

    /

    PF OA  &   PF OS   F re e

    Application

    This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.

    The vent plugs can be used in breathable cap products for chemicals packaging containers, and be suitable for High- concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.

    XINXIA VENT PLUG D38 (2)

    Shelf Life

    Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 ° F (27 ° C) and 60% RH.

    Note

    All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control. 

    All technical information and advice given here is based on XINXIA’s previous experiences and test results. XINXIA gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

    Leave Your Message