Colorful Vent Membrane XINXIA-BL10D
PRODUCT NAME |
Automotive & Electronics Vent Membrane |
PRODUCT MODEL |
XINXIA-G80WO |
PRODUCT DESCRIPTION |
e-PTFE Oleophobic and Hydrophobic breathable membrane |
APPLICATION FEILD |
Automotive & Electronics |
APPLICATION PRODUCTS |
/ |
Membrane Properties
PHYSICAL PROPERTIES |
REFERED TEST STANDARD |
UNIT |
TYPICAL DATA |
Membrane Color |
/ |
/ |
Bright Blue |
Membrane Construction |
/ |
/ |
PTFE / PET Fabric |
Membrane Surface Property |
/ |
/ |
Oleophobic/Hydrophobic |
|
Thickness
|
ISO 534 |
mm |
0.12±0.05 |
|
Interlayer Bonding Strength (90 degree peel) |
Internal Method
|
N/inch |
>2 |
Min Air Flow Rate |
ASTM D737 (Test area：1 cm²) |
ml/min/cm²@ 7Kpa |
>900 |
Typical Air Flow Rate |
ASTM D737 (Test area：1 cm²) |
ml/min/cm²@ 7Kpa |
1400 |
Water Entry Pressure |
ASTM D751 (Test area：1 cm²) |
KPa for 30 sec |
>80 |
IP Rating |
IEC 60529 |
/ |
IP68 |
Water Vapor Transmission Rate (evaporation) |
GB/T 12704.2 (38℃/50%RH 、Cupping method) |
g/m2/24h |
>5000 |
Oleophobic Grade |
AATCC 118 |
Grade |
NA |
Operation Temperature |
IEC 60068-2-14 |
℃ |
-40℃ ~ 125℃ |
ROHS |
IEC 62321 |
/ |
Meet ROHS Requirements |
PFOA & PFOS |
US EPA 3550C & US EPA 8321B |
/ |
PFOA & PFOS Free |
application
This series of membranes could be used in Automotive Lamps, Automotive Sensitive Electronics, Outdoor Lighting, Outdoor Electronic Devices, Household Electrical and Electronics etc.
The membrane can balance inside/outside pressure differentials of sealed enclosures while blocking contaminants, which could increase components’ reliability and extend their service life.
Shelf Life
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on XINXIA’s previous experiences and test results. XINXIA gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
What are the features of ePTFE membrane?
High temperature resistance - working temperature up to 250℃
Low temperature resistance - working temperature up to -180℃
Weather resistance - with the best aging life in plastics
High lubrication - is the lowest friction coefficient in solid materials Non-adhesion - is the smallest surface tension in solid materials, does not adhere to any known solid substances
Corrosion resistance - inert to most chemicals and solvents, resistant to strong acids and alkalis, water and various organic solvents
Non-toxic - has physiological inertia, as artificial blood vessels and organs implanted in the body for a long time without adverse reactions
