100% ePTFE Vent Membrane
Technical Data Sheet
PRODUCT NAME |
Automotive & Electronics Vent Membrane |
PRODUCT MODEL |
XINXIA-G80WO |
PRODUCT DESCRIPTION |
e-PTFE Oleophobic and Hydrophobic breathable membrane |
APPLICATION FEILD |
Automotive & Electronics |
APPLICATION PRODUCTS |
/ |
Membrane Properties
PHYSICAL PROPERTIES |
REFERED TEST STANDARD |
UNIT |
TYPICAL DATA |
Membrane Color |
/ |
/ |
Dark Gray |
Membrane Construction |
/ |
/ |
PTFE |
Membrane Surface Property |
/ |
/ |
Oleophobic/Hydrophobic |
Thickness |
ISO 534 |
mm |
0.19±0.05 |
|
Interlayer Bonding Strength (90 degree peel) |
Internal Method |
N/inch |
NA |
Min Air Flow Rate |
ASTM D737 (test area：1 cm²) |
ml/min/cm²@ 7Kpa |
>250 |
Typical Air Flow Rate |
ASTM D737 (Test area：1 cm²) |
ml/min/cm²@ 7Kpa |
500 |
Water Entry Pressure |
ASTM D751 (Test area：1 cm²) |
KPa for 30 sec |
>40 |
IP Rating |
IEC 60529 |
/ |
IP68 |
Water Vapor Transmission Rate |
GB/T 12704.2 (38℃/50%RH, Cupping method) |
g/m2/24h |
>5000 |
Oleophobic Grade |
AATCC 118 |
Grade |
≥7 |
application
This series of membranes could be used in Automotive Lamps, Automotive Sensitive Electronics, Outdoor Lighting, Outdoor Electronic Devices, Household Electrical and Electronics etc.
The membrane can balance inside/outside pressure differentials of sealed enclosures while blocking contaminants, which could increase components’ reliability and extend their service life.
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on XINXIA’s previous experiences and test results. XINXIA gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
-
XINXIA-G80WO_TDS.pdf
Download